The short answer
A technical rider tells the venue what your act needs to perform: line-up, stage space, power, who provides the PA, an input list and a simple stage plot. A hospitality rider covers load-in, parking, food, drinks and a changing space. For pub and wedding gigs, keep both to one page each and separate the essentials from the nice-to-haves. Copy the template below and fill it in once.
Key takeaways
- A tech rider covers stage size, power, PA, inputs and a stage plot. A hospitality rider covers load-in, parking, food and drink.
- For pubs and small venues, one page is enough. Long arena-style riders get ignored.
- Split every item into essential and preferred so the venue knows what really matters.
- State your power needs in sockets and circuits, and ask for RCD-protected supply near the stage.
- Send the rider with the booking agreement, not on the day.
A technical rider is a short document that tells a venue what your act needs to perform. A hospitality rider covers how you will be looked after on the day. For pubs, bars and weddings, one page for each is plenty: line-up, stage space, power, PA, an input list, a stage plot, then load-in, parking, food and drink. Copy the template below, fill it in once and send it with every booking.
What is a technical rider?
It is your act's set of performance requirements. Venues use it to check they can host you, plan where you will set up and avoid surprises at load-in. Larger venues with a house sound engineer use the input list and stage plot to prepare the desk.
At grassroots level, a rider is mostly logistics. The most useful question it answers for a pub landlord is "how much of my bar do you need, and how many sockets?"
What should a band rider include?
| Section | What to include | Pub gig | Wedding |
|---|---|---|---|
| Contact | Name and phone for the day | Essential | Essential |
| Line-up | Number of performers and instruments | Essential | Essential |
| Stage space | Minimum width and depth in metres | Essential | Essential |
| Power | Number of sockets, separate circuits, distance from stage | Essential | Essential |
| PA | Who provides it, what you bring | Essential | Essential |
| Input list | Every mic and line input | Only if house PA | Useful |
| Stage plot | Simple layout diagram in text or image | Useful | Useful |
| Timings | Load-in, set-up time, soundcheck, set lengths, pack-down time | Essential | Essential |
| Volume | Whether you can work with a limiter or house volume | Useful | Essential |
| Hospitality | Parking, food, drinks, changing space | Useful | Essential |
The template
Copy everything inside the box and replace the blanks. Mark anything optional as "preferred".
TECHNICAL AND HOSPITALITY RIDER
Act name: ______________________ Version date: ____ / ____ / ______
CONTACT ON THE DAY
Name: ___________________ Mobile: ___________________
Sound / tech contact (if different): ___________________
LINE-UP
___ performers:
1. ________________ (instrument / vocals)
2. ________________ (instrument / vocals)
3. ________________ (instrument / vocals)
4. ________________ (instrument / vocals)
TECHNICAL RIDER
1. Stage / performance area
Minimum space needed: ___ m wide x ___ m deep [ESSENTIAL]
Raised stage: not required / preferred
Distance from customers: please keep ___ m clear in front of the band [PREFERRED]
We must not be set up in front of a fire exit. [ESSENTIAL]
2. Power
Sockets needed: ___ standard 13A sockets within ___ m of the performance area [ESSENTIAL]
Separate circuits: ___ (e.g. 1 for PA, 1 for backline and lights) [PREFERRED]
RCD protection: we use our own plug-in RCD / please confirm sockets are RCD protected
Our equipment is maintained and visually checked before every gig.
Last PAT test date (if applicable): ____ / ____ / ______
3. PA and sound
We bring: [full PA / vocal PA only / nothing, house PA needed]
PA details (if we bring it): ___ W total, ___ speakers, ___ monitors, mixer: ________
If house PA: we need ___ monitor mixes and the input list below.
We can work with a sound limiter or house volume level: yes / no
Typical volume and any noise restrictions: please tell us in advance.
4. Input list (for house engineers)
Ch | Source | Mic / DI | Stand
1 | Kick drum | ____________ | short
2 | Snare | ____________ | clip / short
3 | Overhead | ____________ | tall boom
4 | Bass guitar | DI | none
5 | Guitar amp | ____________ | short
6 | Keys L | DI | none
7 | Keys R | DI | none
8 | Lead vocal | ____________ | tall boom
9 | Backing vocal 1 | ____________ | tall boom
10 | Backing vocal 2 | ____________ | tall boom
(Delete or add lines to match your act.)
5. Stage plot (audience at the bottom)
[ DRUMS ]
[ BASS AMP ] [ GUITAR AMP ]
[ KEYS ] [ LEAD VOX ] [ BV 1 ]
---------------- AUDIENCE ----------------
Power needed at: drums riser / back left / back right
6. Lighting
We bring: [lights / none]. Power for lights: ___ socket(s).
House lighting: please keep the performance area lit for safety.
7. Timings
Load-in time needed: ___ minutes
Set-up and soundcheck: ___ minutes
Sets: ___ x ___ minutes (with ___ minute break)
Pack-down: ___ minutes
We will stick to the venue's finish time.
HOSPITALITY RIDER
8. Arrival and parking
Vehicles: ___ (e.g. 1 van, 2 cars)
Parking needed: [on-site / nearby, loading bay for ___ minutes] [ESSENTIAL]
Load-in route: please tell us about steps, lifts or long carries.
9. Space
Somewhere secure to leave cases during the set [ESSENTIAL]
Changing space [PREFERRED; ESSENTIAL for weddings]
10. Food and drink
Drinking water for ___ performers on stage [ESSENTIAL]
Drinks: ___ per performer, or as agreed [PREFERRED]
Hot meal or food: [required for gigs over ___ hours / preferred / not needed]
Dietary needs: ________________________________
11. Guest list
___ guest places (if applicable)
12. Other
Wi-fi for card payments / merch: [preferred / not needed]
Anything else: ________________________________
Signed for the act: ____________________ Date: ____ / ____ / ______How do you write a rider venues will actually read?
- Keep it to one page per rider for small venues. If it runs to five pages, the landlord will skim it and miss the bit about sockets.
- Mark essential versus preferred. "Essential: 2 sockets within 3 metres. Preferred: separate circuits." This shows you know the difference between needs and wishes.
- Use measurements. "3m x 2.5m" is far more useful than "a decent-sized space".
- State what you bring. A band that brings its own PA and lights is an easier booking for a pub with no house system. Say so near the top.
- Be realistic about hospitality. A pub paying a modest fee for a three-hour slot may offer drinks but not a hot meal. Weddings and longer days are where food matters most.
- Version-date it. Line-ups and kit change. Put the date at the top and update it.
What should a solo or acoustic act's rider look like?
Shorter. A solo singer with a backing-track system might need:
| Item | Example |
|---|---|
| Space | 2m x 1.5m |
| Power | 1 socket within 3m |
| PA | Own compact PA, suitable for up to around 100 people (state your own) |
| Set-up | 20 minutes |
| Hospitality | Water and two drinks, parking near the door |
The same template works; delete what you do not need.
Safety points to include
Venues control the premises and are responsible for safe access, exits and power. You are responsible for your own equipment. Saying the right things in your rider shows you take it seriously.
- Fire exits. State that you will not set up in front of one. Small pubs sometimes suggest it.
- Power. HSE recommends RCD protection rated no more than 30mA as secondary protection. Many acts carry their own plug-in RCD. Say if you do.
- Maintenance. HSE says the law requires electrical equipment to be maintained to prevent danger. It does not require PAT testing as such. Listing your check routine answers the question. See PAT testing for musicians.
- Insurance. Many venues ask for public liability insurance. Mention your cover in the booking agreement. See public liability insurance for musicians.
- Volume. Venues near homes can face noise action from the council, and some use sound limiters. Saying you can work to a house volume makes you an easier booking.
How should you send your rider?
Send it with the booking agreement, not on the day, and ask the venue to confirm anything they cannot provide. Our gig booking agreement template has a line for the rider so it becomes part of the deal.
On Gigtown, artists on the Pro plan get enhanced media and a shareable booking page, which is a sensible place to keep a short summary of your set-up so venues see it before they enquire. For more on getting booked, read how to get pub gigs in the UK or, for weddings, how to become a wedding act.
Frequently asked questions
Do pub bands need a technical rider?
Not a long one, but a one-page rider saves time. It tells the venue how much floor space you need, how many sockets, whether you bring a PA and when you will arrive.
What is the difference between a tech rider and a hospitality rider?
A tech rider is about performing: stage, power, sound and lighting. A hospitality rider is about looking after the act: parking, food, drinks, a changing room and guest list places.
Is a rider legally binding?
It is binding if both sides agree it as part of the booking. Attach it to the booking agreement and refer to it there.
What is an input list?
A numbered list of every microphone and direct line going into the mixing desk, with what it is for. It lets a house engineer set up the desk before you arrive.
Should I include PAT test records in my rider?
The law does not require PAT testing, but many venues ask for evidence that equipment is maintained. Saying in your rider that kit is checked and listing your last test date answers the question early.
Sources
- HSE: Portable appliance testing FAQs (checked November 2026)
- HSE: Electrical safety at places of entertainment, GS50 (checked November 2026)
- HSE: Event safety, electrical safety (checked November 2026)
- GOV.UK: Noise nuisances, how councils deal with complaints (checked November 2026)
Sources checked 18 November 2026. This guide is general information, not legal, tax or financial advice.

